Aphosys Li Spark ESS 1200

Power Beyond Backup

Simplify everyday power backup with the APHOSYS Li Spark ESS 1200. This wall-mounted system combines a 1kVA pure sine wave inverter with an inbuilt 12.8V 100Ah lithium battery, providing 1280Wh (1.28kWh) nominal battery energy and a 700W rated load capacity.

Made for compatible essential loads in homes, apartments, small offices and shops, this integrated inverter and battery system offers a compact alternative to a separate inverter and external battery setup.

• Inbuilt lithium battery: Integrated 12.8V 100Ah battery with 1280Wh nominal energy.
• Pure sine wave output: 1kVA inverter capacity with a 700W load rating.
• Wall-mounted format: Keep your backup installation compact and organised.
• No water top-up: Lithium battery technology requires no routine battery water filling.
• Integrated protection: Battery management system and a display for monitoring system status.

Choose a combination of compatible lights, fans, a Wi-Fi router, television or small office equipment within the 700W rating. Check both running power and appliance starting demand. Actual backup duration depends on connected load, battery condition, system losses and operating conditions; 1280Wh is nominal battery energy, not guaranteed usable AC energy.

This model is not solar compatible. A qualified installer should confirm appliance compatibility, wiring and installation requirements.

• Lithium / LiFePO₄ battery technology.
• BMS protection for overload, short circuit, deep discharge, overcharge and temperature.
• No battery water top-up required.

• Overload and short-circuit protection.
• Low-battery protection and battery high cut-off.
• Over-temperature and surge protection.
• PV reverse protection.
• AC MCB trip protection.
• Automatic cut-off and restart.

A multifunction graphic LCD with LED indicators shows battery voltage, mains/grid availability, input voltage, charging mode, charging current, load-running status, output voltage, solar current, battery-charge indication and load percentage.

• Four LED status indicators: GRID, INV, SOL and ERR.
• Front-panel SET control for changing settings.
• Front-panel MODE control for entering configuration.
• Side-panel ESS ON/OFF switch.

Compatible essential loads in homes and apartments, offices and shops, rural and urban backup installations, clinics and POS counters, security systems and remote sites.